APPLICATIONS

Greenhouses & Horticulture

Agriculture HorticulturistsKMPS is intended to disinfect inanimate environmental surfaces such as floors, walls, glass greenhouse structures, ventilation equipment, utensils, trays, containers, water systems, evaporative coolers, storage rooms, and vehicles in greenhouses and other horticultural settings prior to introduction or reintroduction of plants, seeds, or soil.

KMPS must NOT be applied to plants, seeds, or soil. If necessary, remove or cover these items prior to product use.

Plant pathogens tested:

  • Botrytis cinera
  • Fusarium oxysporum
  • Penicillium oxalicum
  • Pythium aphanidermatium
  • Rhizoctonia solani
  • Sclerotinia sclerotiorum

MIXING INSTRUCTIONS

AREAS DILUTION RATE APPLICATION
Floors, walls, glass greenhouse structures, storage rooms etc. 1:100 Surfaces should be clean at the start and any visible soil should be removed from hard non-porous surfaces prior to treatment. Use a high pressure washer to wash all surfaces to remove loose dirt. Apply the solution with a mop, sponge, or power sprayer, to thoroughly wet all surfaces. Heavy growth of algae or fungi may have to be scrubbed off following application.
Equipment including utensils, trays, pots, flats, trays, pruning equipment, carts and transport vehicles. 1:100 Surfaces should be clean at the start and any visible soil should be removed from hard non-porous surfaces prior to treatment. Use a high pressure washer to wash all surfaces to remove loose dirt. Apply the solution with a mop, sponge, or power sprayer, to thoroughly wet all surfaces. Heavy growth of algae or fungi may have to be scrubbed off following application.
If areas have NOT been pre-cleaned 1:50 Surfaces should be clean at the start and any visible soil should be removed from hard non-porous surfaces prior to treatment. Use a high pressure washer to wash all surfaces to remove loose dirt. Apply the solution with a mop, sponge, or power sprayer, to thoroughly wet all surfaces. Heavy growth of algae or fungi may have to be scrubbed off following application.
Water systems, Evaporative coolers 1:100 Surfaces should be visibly clean prior to treatment. Treat existing algae and slime contaminated surfaces with KMPS solution.